Screwed gates line with a light and clean design
Collezione cancelli in alluminio avvitati LINEA CASA
Maintenance and cleaning to ensure the continuity of the decorative and protective properties of the surface.
The architectural paints used in the system require regular maintenance and cleaning to ensure the continuity of the decorative and protective properties of the surface.
The frequency of cleaning depends on many factors, including:
1st geographical location of the building
2nd class of environmental corrosiveness in which the building is inserted (for example: maritime, industrial, residential, rural, etc.)
3rd level of polluting emissions in the air
4th presence of winds with considerable intensity (eg Bora di Trieste) possibility of dust carried by the wind (eg Sand, dust, etc.)
hypothesis of change over time of the corrosivity class (e.g. transition from rural to industrial)
The best cleaning method is through a regular washing of the surface, using a solution of warm water and mild detergent (pH 5-8). All surfaces must be cleaned with a soft cloth or sponge, do not use brushes if not of natural origin.
The frequency of cleaning depends on the aspect that you want to keep and on the need to remove deposits which, in case of prolonged contact, could damage the coating. In a not particularly aggressive environment (for example rural or urban), the normal cleaning frequency can be about 12 months. In the presence of particularly dirty deposits, a higher cleaning frequency is recommended. When the environment is aggressive, the cleaning frequency should be reduced at 3 month intervals. In the presence of high atmospheric pollution or in the presence of a particularly corrosive environment or in the presence of water with many fixed residues, the period between interventions must be further reduced.
The use of solvents or solutions containing: chlorinated hydrocarbons acetones abrasive pastes is absolutely prohibited
TYPE OF ENVIRONMENT MAINTENANCE PROGRAM
urban and rural inspection and cleaning every 12 months
industrial inspection and cleaning every 6 months
maritime inspection and cleaning every 3 months
industrial and maritime inspection and cleaning every 3 months
If it is necessary to touch the painted surface, we recommend the use of two-component polyurethane paints, to be applied according to the following cycle:
clean the surface with a little aggressive solvent, apply it with a cloth freely, dry, taking care to remove any residues.
if necessary, even the surface by smoothing the part to be restored with abrasive paper (max grain 320) and then clean carefully with a dry cloth
stir the paint vigorously for about 2 minutes
in the case of paint in a spray can (spray can), spray the color on the palette (even a sheet of cardboard can do on the case)
apply the paint by brush (small) and limit the application strictly to the part to be restored