Columns of 200 mm x 200 mm

700 ° die-cast aluminum decoration

Upright side hinge realized with full aluminum 40 mm x 40 mm

Aluminum fixing plate cover

Valve to grease the hinge

Wear resistant brass bushing

CHANTAL 50 400.1

Side hinge attachment made with square profile 40 mm x 40 mm, full, the upright is machined and rotated to create the housing of the hinges.

The hinges are equipped with grease and wear-resistant brass bushings.

T utte the hinges are equipped with aluminum sheet metal roofing.

Central, upper and intermediate supports made with 40 mm x 40 mm x 3 mm wall thickness profile. Central punch with complete plate 50 mm x 10 mm. Vertical frame fixing system with portable aluminum rivets.

CHIARA 50 300.1

Side hinge connection made with square profile 40 mm x 40 mm, full, the upright is machined and rotated to create the housing of the hinges.

The hinges are equipped with grease and wear-resistant brass bushings.

T utte the hinges are equipped with aluminum sheet metal roofing.

Central, upper and intermediate supports made with 40 mm x 40 mm x 3 mm wall thickness profile. Central punch with complete plate 50 mm x 10 mm. Vertical frame fixing system with portable aluminum rivets.

EDDA 50200.1

Side hinge connection made with square profile 40 mm x 40 mm, full, the upright is machined and rotated to create the housing of the hinges.

The hinges are equipped with grease and wear-resistant brass bushings.

T utte the hinges are equipped with aluminum sheet metal roofing.

Central, upper and intermediate supports made with 40 mm x 40 mm x 3 mm wall thickness profile. Central punch with complete plate 50 mm x 10 mm. Vertical frame fixing system with portable aluminum rivets.

EBE 50000.1

Side hinge connection made with square profile 40 mm x 40 mm, full, the upright is machined and rotated to create the housing of the hinges.

The hinges are equipped with grease and wear-resistant brass bushings.

T utte the hinges are equipped with aluminum sheet metal roofing.

Central, upper and intermediate supports made with 40 mm x 40 mm x 3 mm wall thickness profile. Central punch with complete plate 50 mm x 10 mm. Vertical frame fixing system with portable aluminum rivets.

EDMONDA 50 100.1

Side hinge connection made with square profile 40 mm x 40 mm, full, the upright is machined and rotated to create the housing of the hinges.

The hinges are equipped with grease and wear-resistant brass bushings.

T utte the hinges are equipped with aluminum sheet metal roofing.

Central, upper and intermediate supports made with 40 mm x 40 mm x 3 mm wall thickness profile. Central punch with complete plate 50 mm x 10 mm. Vertical frame fixing system with portable aluminum rivets.

EDWARD 51400.1

Side hinge connection made with square profile 40 mm x 40 mm, full, the upright is machined and rotated to create the housing of the hinges.

The hinges are equipped with grease and wear-resistant brass bushings.

T utte the hinges are equipped with aluminum sheet metal roofing.

Central, upper and intermediate supports made with 40 mm x 40 mm x 3 mm wall thickness profile. Central punch with complete plate 50 mm x 10 mm. Vertical frame fixing system with portable aluminum rivets.

CARINA 51300.1

Side hinge connection made with square profile 40 mm x 40 mm, full, the upright is machined and rotated to create the housing of the hinges.

The hinges are equipped with grease and wear-resistant brass bushings.

T utte the hinges are equipped with aluminum sheet metal roofing.

Central, upper and intermediate supports made with 40 mm x 40 mm x 3 mm wall thickness profile. Central punch with complete plate 50 mm x 10 mm. Vertical frame fixing system with portable aluminum rivets.

CARLOTTA 51200.1

Side hinge connection made with square profile 40 mm x 40 mm, full, the upright is machined and rotated to create the housing of the hinges.

The hinges are equipped with grease and wear-resistant brass bushings.

T utte the hinges are equipped with aluminum sheet metal roofing.

Central, upper and intermediate supports made with 40 mm x 40 mm x 3 mm wall thickness profile. Central punch with complete plate 50 mm x 10 mm. Vertical frame fixing system with portable aluminum rivets.

CASIMIRA 51 000.1

Side hinge connection made with square profile 40 mm x 40 mm, full, the upright is machined and rotated to create the housing of the hinges.

The hinges are equipped with grease and wear-resistant brass bushings.

T utte the hinges are equipped with aluminum sheet metal roofing.

Central, upper and intermediate supports made with 40 mm x 40 mm x 3 mm wall thickness profile. Central punch with complete plate 50 mm x 10 mm. Vertical frame fixing system with portable aluminum rivets.

CECILIA 51100.1

Side hinge connection made with square profile 40 mm x 40 mm, full, the upright is machined and rotated to create the housing of the hinges.

The hinges are equipped with grease and wear-resistant brass bushings.

T utte the hinges are equipped with aluminum sheet metal roofing.

Central, upper and intermediate supports made with 40 mm x 40 mm x 3 mm wall thickness profile. Central punch with complete plate 50 mm x 10 mm. Vertical frame fixing system with portable aluminum rivets.

CAMELIA 52400.1

Side hinge connection made with square profile 40 mm x 40 mm, full, the upright is machined and rotated to create the housing of the hinges.

The hinges are equipped with grease and wear-resistant brass bushings.

T utte the hinges are equipped with aluminum sheet metal roofing.

Central, upper and intermediate supports made with 40 mm x 40 mm x 3 mm wall thickness profile. Central punch with complete plate 50 mm x 10 mm. Vertical frame fixing system with portable aluminum rivets.

ALOE 52300.1

Side hinge connection made with square profile 40 mm x 40 mm, full, the upright is machined and rotated to create the housing of the hinges.

The hinges are equipped with grease and wear-resistant brass bushings.

T utte the hinges are equipped with aluminum sheet metal roofing.

Central, upper and intermediate supports made with 40 mm x 40 mm x 3 mm wall thickness profile. Central punch with complete plate 50 mm x 10 mm. Vertical frame fixing system with portable aluminum rivets.

CAROLINA 52200.1

Side hinge connection made with square profile 40 mm x 40 mm, full, the upright is machined and rotated to create the housing of the hinges.

The hinges are equipped with grease and wear-resistant brass bushings.

T utte the hinges are equipped with aluminum sheet metal roofing.

Central, upper and intermediate supports made with 40 mm x 40 mm x 3 mm wall thickness profile. Central punch with complete plate 50 mm x 10 mm. Vertical frame fixing system with portable aluminum rivets.

CASSANDRA 52000.1

Side hinge connection made with square profile 40 mm x 40 mm, full, the upright is machined and rotated to create the housing of the hinges.

The hinges are equipped with grease and wear-resistant brass bushings.

T utte the hinges are equipped with aluminum sheet metal roofing.

Central, upper and intermediate supports made with 40 mm x 40 mm x 3 mm wall thickness profile. Central punch with complete plate 50 mm x 10 mm. Vertical frame fixing system with portable aluminum rivets.

AMBER 52 100.1

Side hinge connection made with square profile 40 mm x 40 mm, full, the upright is machined and rotated to create the housing of the hinges.

The hinges are equipped with grease and wear-resistant brass bushings.

T utte the hinges are equipped with aluminum sheet metal roofing.

Central, upper and intermediate supports made with 40 mm x 40 mm x 3 mm wall thickness profile. Central punch with complete plate 50 mm x 10 mm. Vertical frame fixing system with portable aluminum rivets.

CANDIDA 53 400.1

Side hinge connection made with square profile 40 mm x 40 mm, full, the upright is machined and rotated to create the housing of the hinges.

The hinges are equipped with grease and wear-resistant brass bushings.

T utte the hinges are equipped with aluminum sheet metal roofing.

Central, upper and intermediate supports made with 40 mm x 40 mm x 3 mm wall thickness profile. Central punch with complete plate 50 mm x 10 mm. Vertical frame fixing system with portable aluminum rivets.

CARLA 53 300.1

Side hinge connection made with square profile 40 mm x 40 mm, full, the upright is machined and rotated to create the housing of the hinges.

The hinges are equipped with grease and wear-resistant brass bushings.

T utte the hinges are equipped with aluminum sheet metal roofing.

Central, upper and intermediate supports made with 40 mm x 40 mm x 3 mm wall thickness profile. Central punch with complete plate 50 mm x 10 mm. Vertical frame fixing system with portable aluminum rivets.

CARMELA 53200.1

Side hinge connection made with square profile 40 mm x 40 mm, full, the upright is machined and rotated to create the housing of the hinges.

The hinges are equipped with grease and wear-resistant brass bushings.

T utte the hinges are equipped with aluminum sheet metal roofing.

Central, upper and intermediate supports made with 40 mm x 40 mm x 3 mm wall thickness profile. Central punch with complete plate 50 mm x 10 mm. Vertical frame fixing system with portable aluminum rivets.

CATERINA 53000.1

Side hinge connection made with square profile 40 mm x 40 mm, full, the upright is machined and rotated to create the housing of the hinges.

The hinges are equipped with grease and wear-resistant brass bushings.

T utte the hinges are equipped with aluminum sheet metal roofing.

Central, upper and intermediate supports made with 40 mm x 40 mm x 3 mm wall thickness profile. Central punch with complete plate 50 mm x 10 mm. Vertical frame fixing system with portable aluminum rivets.

LIGHT BLUE 53 100.1

Side hinge connection made with square profile 40 mm x 40 mm, full, the upright is machined and rotated to create the housing of the hinges.

The hinges are equipped with grease and wear-resistant brass bushings.

T utte the hinges are equipped with aluminum sheet metal roofing.

Central, upper and intermediate supports made with 40 mm x 40 mm x 3 mm wall thickness profile. Central punch with complete plate 50 mm x 10 mm. Vertical frame fixing system with portable aluminum rivets.

Chantal   Pedestrian / 20400

Side hinge connection made with square profile 40 mm x 40 mm, full, the upright is machined and rotated to create the housing of the hinges.

The hinges are equipped with grease and wear-resistant brass bushings.

T utte the hinges are equipped with aluminum sheet metal roofing.

Central, upper and intermediate supports made with 40 mm x 40 mm x 3 mm wall thickness profile. Central punch with complete plate 50 mm x 10 mm.

Chantal   Pedestrian / 20400

So what   Pedestrian / 20000

Side hinge connection made with square profile 40 mm x 40 mm, full, the upright is machined and rotated to create the housing of the hinges.

The hinges are equipped with grease and wear-resistant brass bushings.

T utte the hinges are equipped with aluminum sheet metal roofing.

Central, upper and intermediate supports made with 40 mm x 40 mm x 3 mm wall thickness profile. Central punch with complete plate 50 mm x 10 mm.

So what   Pedestrian / 20000

Chiara   Pedestrian / 20300

Side hinge connection made with square profile 40 mm x 40 mm, full, the upright is machined and rotated to create the housing of the hinges.

The hinges are equipped with grease and wear-resistant brass bushings.

T utte the hinges are equipped with aluminum sheet metal roofing.

Central, upper and intermediate supports made with 40 mm x 40 mm x 3 mm wall thickness profile. Central punch with complete plate 50 mm x 10 mm.

Edmonda   Pedestrian / 20100

Side hinge connection made with square profile 40 mm x 40 mm, full, the upright is machined and rotated to create the housing of the hinges.

The hinges are equipped with grease and wear-resistant brass bushings.

T utte the hinges are equipped with aluminum sheet metal roofing.

Central, upper and intermediate supports made with 40 mm x 40 mm x 3 mm wall thickness profile. Central punch with complete plate 50 mm x 10 mm.

Casimira   Pedestrian / A / 20300

Side hinge connection made with square profile 40 mm x 40 mm, full, the upright is machined and rotated to create the housing of the hinges.

The hinges are equipped with grease and wear-resistant brass bushings.

T utte the hinges are equipped with aluminum sheet metal roofing.

Central, upper and intermediate supports made with 40 mm x 40 mm x 3 mm wall thickness profile. Central punch with complete plate 50 mm x 10 mm.

Carlotta   Pedestrian / A / 20100

Side hinge connection made with square profile 40 mm x 40 mm, full, the upright is machined and rotated to create the housing of the hinges.

The hinges are equipped with grease and wear-resistant brass bushings.

T utte the hinges are equipped with aluminum sheet metal roofing.

Central, upper and intermediate supports made with 40 mm x 40 mm x 3 mm wall thickness profile. Central punch with complete plate 50 mm x 10 mm.

Cecilia   Pedestrian / A / 20300

Side hinge connection made with square profile 40 mm x 40 mm, full, the upright is machined and rotated to create the housing of the hinges.

The hinges are equipped with grease and wear-resistant brass bushings.

T utte the hinges are equipped with aluminum sheet metal roofing.

Central, upper and intermediate supports made with 40 mm x 40 mm x 3 mm wall thickness profile. Central punch with complete plate 50 mm x 10 mm.

Caina   Pedestrian / A / 21300

Side hinge connection made with square profile 40 mm x 40 mm, full, the upright is machined and rotated to create the housing of the hinges.

The hinges are equipped with grease and wear-resistant brass bushings.

T utte the hinges are equipped with aluminum sheet metal roofing.

Central, upper and intermediate supports made with 40 mm x 40 mm x 3 mm wall thickness profile. Central punch with complete plate 50 mm x 10 mm.

Edoara Pedestrian / A / 21400

Side hinge connection made with square profile 40 mm x 40 mm, full, the upright is machined and rotated to create the housing of the hinges.

The hinges are equipped with grease and wear-resistant brass bushings.

T utte the hinges are equipped with aluminum sheet metal roofing.

Central, upper and intermediate supports made with 40 mm x 40 mm x 3 mm wall thickness profile. Central punch with complete plate 50 mm x 10 mm.

Casimira   Pedestrian / 23000

Side hinge connection made with square profile 40 mm x 40 mm, full, the upright is machined and rotated to create the housing of the hinges.

The hinges are equipped with grease and wear-resistant brass bushings.

T utte the hinges are equipped with aluminum sheet metal roofing.

Central, upper and intermediate supports made with 40 mm x 40 mm x 3 mm wall thickness profile. Central punch with complete plate 50 mm x 10 mm.

Carlotta Pedestrian / 23200

Side hinge connection made with square profile 40 mm x 40 mm, full, the upright is machined and rotated to create the housing of the hinges.

The hinges are equipped with grease and wear-resistant brass bushings.

T utte the hinges are equipped with aluminum sheet metal roofing.

Central, upper and intermediate supports made with 40 mm x 40 mm x 3 mm wall thickness profile. Central punch with complete plate 50 mm x 10 mm.

Cecilia   Pedestrian / 23100

Side hinge attachment made with square profile 40 mm x 40 mm, full, the upright is machined and rotated to create the hinge housing.

The hinges are equipped with grease and wear-resistant brass bushings.

T utte the hinges are equipped with aluminum sheet metal roofing.

Central, upper and intermediate supports made with 40 mm x 40 mm x 3 mm wall thickness profile. Central punch with complete plate 50 mm x 10 mm.

Nice   Pedestrian / 23300

Side hinge attachment made with square profile 40 mm x 40 mm, full, the upright is machined and rotated to create the hinge housing.

The hinges are equipped with grease and wear-resistant brass bushings.

T utte the hinges are equipped with aluminum sheet metal roofing.

Central, upper and intermediate supports made with 40 mm x 40 mm x 3 mm wall thickness profile. Central punch with complete plate 50 mm x 10 mm.

Edward   Pedestrian / 23400

Side hinge attachment made with square profile 40 mm x 40 mm, full, the upright is machined and rotated to create the hinge housing.

The hinges are equipped with grease and wear-resistant brass bushings.

T utte the hinges are equipped with aluminum sheet metal roofing.

Central, upper and intermediate supports made with 40 mm x 40 mm x 3 mm wall thickness profile. Central punch with complete plate 50 mm x 10 mm.

Cassandra   Pedestrian / 22000

Side hinge connection made with square profile 40 mm x 40 mm, full, the upright is machined and rotated to create the housing of the hinges.

The hinges are equipped with grease and wear-resistant brass bushings.

T utte the hinges are equipped with aluminum sheet metal roofing.

Central, upper and intermediate supports made with 40 mm x 40 mm x 3 mm wall thickness profile. Central punch with complete plate 50 mm x 10 mm.

Carolina   Pedestrian / 22200

Side hinge connection made with square profile 40 mm x 40 mm, full, the upright is machined and rotated to create the housing of the hinges.

The hinges are equipped with grease and wear-resistant brass bushings.

T utte the hinges are equipped with aluminum sheet metal roofing.

Central, upper and intermediate supports made with 40 mm x 40 mm x 3 mm wall thickness profile. Central punch with complete plate 50 mm x 10 mm.

Amber   Pedestrian / 22100

Side hinge connection made with square profile 40 mm x 40 mm, full, the upright is machined and rotated to create the housing of the hinges.

The hinges are equipped with grease and wear-resistant brass bushings.

T utte the hinges are equipped with aluminum sheet metal roofing.

Central, upper and intermediate supports made with 40 mm x 40 mm x 3 mm wall thickness profile. Central punch with complete plate 50 mm x 10 mm.

Aloe   Pedestrian / 22300

Side hinge connection made with square profile 40 mm x 40 mm, full, the upright is machined and rotated to create the housing of the hinges.

The hinges are equipped with grease and wear-resistant brass bushings.

T utte the hinges are equipped with aluminum sheet metal roofing.

Central, upper and intermediate supports made with 40 mm x 40 mm x 3 mm wall thickness profile. Central punch with complete plate 50 mm x 10 mm.

Camellia   Pedestrian / 22400

Side hinge connection made with square profile 40 mm x 40 mm, full, the upright is machined and rotated to create the housing of the hinges.

The hinges are equipped with grease and wear-resistant brass bushings.

T utte the hinges are equipped with aluminum sheet metal roofing.

Central, upper and intermediate supports made with 40 mm x 40 mm x 3 mm wall thickness profile. Central punch with complete plate 50 mm x 10 mm.

Description

ALUTREND aluminum gates are a very qualitative equipment for the protection of your home. Made entirely of primary alloy 6060, it has many welding reinforcements to ensure its resistance, but also a rigidity of the structure against shocks and deformations. ALUTREND camels are available in different colors and sizes according to your needs. Available in the oscillating, sliding, pedestrian, cantilever versions.

• High durability

• A gate to accompany you for years

• High rigidity without deformation over time

• 10 year guarantee

• Highly resistant to corrosion and rust

• Suitable for high salinity areas

• Easy maintenance

• 100% recyclable aluminum

• Reinforcement motorization with a thickness of 8 mm positioned inside, which allows the solid installation of the automation.

• Finish as desired

• The thermal lacquer certified by the QUALICOAT label guarantees superior quality.

• ISO 9001: 2008 customer satisfaction guarantee

• Connect an integrated point

• Adjustable hinges

• Many accessories provided

• Packaging in mdf wood and cardboard ... and impact sensors.