Automatic opening system

Automatic opening system

  1. Sash opening with underground motors ( X-FABKIT 2124 UNUSUAL GATE )
  2. Swing opening with arm motors ( NI-HO7124 )
  3. Swing opening with arm motors up to 5 meters ( Nice TO5024 )
  4. Sliding opening with visible motor ( NICE ROBUS BT RB400KCE 24V )
  5. Sliding doors with internal column motor ( Nice NKSL 400 )
  6. Pedestrian door inside gate opening ( NI-WALY 1024 KCE )
  7. Book opening

1.Swing opening with underground motors ( Nice BM4000 )

 

For swing gates with leaves up to 4 m, concealed underground installation.
230 Vac irreversible electromechanical gearmotor and mechanical stops.

 

Foundation boxes with mechanical stop on opening:

 

• in stainless steel (BMB0X4I), ideal for use in extreme conditions,

• in cataphoresis (BMB0X4), highly resistant to corrosion.

 

Maximum freedom of choice: release from inside and outside, two models with key or lever freely combinable and easy to operate with one hand.

 

Easy to use: mechanical closing stop system integrated in the motor.

 

Standard 110 ° opening, 360 ° optional.

Attention, the price refers to the motor only, without foundation box

  2. Swing opening with arm motors (NI-HO7124)

IRREVERSIBLE 24 Vdc, COMPLETE WITH ARTICULATED ARM, WITH INTEGRATED CONTROL UNIT .

For swing gates with leaves up to 2.4 m, even in the presence of large columns and light structures.

24 Vdc irreversible electromechanical motor reducer. With articulated arm and external mounting. Ideal for intensive use.

Two irreversible 24 Vdc versions with mechanical stops with millimeter adjustment in opening and closing: with integrated control unit (HO7124) and without control unit (HO7224).

Powerful thanks to the torque of 250 Nm.

Strong and compact: 180 mm wide, ideal for any column. Shockproof body of reduced dimensions with aluminum base.

Robust aluminum anti-shearing arm.

Easy to install: thanks to the new fastening bracket with quick coupling for the motor. No welding.

Sophisticated electronics with the integrated control unit, only 3 buttons to manage programming operations:

• obstacle detection and possibility of connection to the 8.2 KOhm sensitive edge , phototest;

• automatic diagnosis of anomalies;

• memorization of the opening and closing limit switches in self-learning;

• possibility to configure the stop input in self-learning,

Na, Nc and latest generation 8.2 KOhm resistive sensitive edges:

• slowdown in opening and closing;

• easy possibility of connecting pairs of additional photocells, photo2;

• pause time programming;

• pedestrian opening and partial opening;

• clutch with anti-crushing safety.

Energy saving and no black out: 3 standby modes to reduce consumption from the mains, or from the battery if connected to the Solemyo kit.

Operation even in the absence of current thanks to the optional batteries (PS124).

Everything under control: thanks to the predisposition for the Opera BUS T4 system, the unit can be used to expand the possibilities of programming, control and diagnostics of the automation on site and remotely.

 

3. Swing opening with arm motors up to 5 meters ( Nice TO5024 )

 

Irreversible gear motor, 24 Vdc, with magnetic encoder, mechanical stop on opening for swing gates with leaves up to 5 m.
Electromechanical gearmotor for external mounting. Also available in the 24 Vdc version, with magnetic encoder. Ideal for residential use.

  Reliability and durability over time, thanks to the body made of two sturdy aluminum shells with polyester paint; more resistant to atmospheric agents. Internal moving components entirely in steel, light alloys and technopolymers. Silent operation: patented arrangement of the internal organs and bronze nut.

Wide and convenient connection compartment: quick and easy access from above to the internal parts located in the upper engine compartment. Ease of installation and maintenance; with built-in capacitor. Recommended control units: Mindy A6F, A60, A700F; for TO4024 Moonclever MC824H.   24 Vdc version with magnetic encoder. Ideal for intensive use, compatible with the Moonclever control unit:

  • simple programming, with a single button;

• self-learning of the limit switches in opening and closing;

• self-diagnosis of anomalies;

• pause time programming;

• pedestrian door;

• slowdown in opening and closing;

• dual technology obstacle detection;

• operation in the absence of current with optional rechargeable batteries (PS324);

• prepared for the connection of the latest generation of sensitive edges

4.Sliding opening with visible motor ( NICE ROBUS BT RB400KCE 24V )

 

Kit for the automation of sliding gates up to 400 Kg, 24 Vdc, integrated control unit

Kit for sliding gates up to 400 kg, with Nice BlueBUS technology, designed for the Solemyo and Opera systems

KIT for the automation of sliding gates up to 400Kg. 24 Vdc, integrated control unit.

Simple: thanks to the BlueBUS system that allows connections with just two wires between the control unit and up to 7 pairs of MoonBus series photocells, control, safety and signaling devices

Practical: control unit and PS124 buffer batteries (optional) that can be connected via a convenient guided plug-in connector, housed inside Robus

Evolved: RB400 is equipped with a temperature sensor that adapts the motor force to the climatic conditions while adapting at the same time for thermal protection. A master / slave selection also automatically synchronizes 2 motors, allowing the automation of sliding gates with two opposing leaves

Intelligent: thanks to obstacle detection and automatic programming of working times. Self-diagnosis with signaling through the flashing light. 8 Programming levels.

Safe: adjustable acceleration and deceleration at the beginning and end of each maneuver. Silence, geared motor on bearings.

Robust: Die-cast aluminum base and release with epoxy paint.

Silent: geared motor on bearings

5.Sliding doors with internal column motor ( Nice NKSL 400 )

Nice NKSL400 Retractable motor for 400kg sliding gates with NAKED SLIDING 400 control unit

 

The first Nice retractable motor for sliding gates up to 400 Kg and leaf length up to 6 meters.
Motor with integrated control unit and absolute encoder, which can be installed inside a reduced size column, suitably perforated.

 

The very small footprint allows the motor to be housed in even very thin columns, with a minimum internal dimension of 140X140 mm.

 

Simple: thanks to the BlueBUS system that allows connections with just two wires between the control unit and up to 7 pairs of MoonBus series photocells, control, safety and signaling devices.

 

Master / slave selection: also automatically synchronizes 2 motors, allowing the automation of sliding gates with two opposing leaves.

 

Intelligent: thanks to obstacle detection and automatic programming of working times. Self-diagnosis with signaling through the flashing light.

 

Safe: adjustable acceleration and deceleration at the beginning and end of each maneuver.

 

Simple and precise limit switch adjustment: integrated absolute limit switch, rapid learning with a single operation with the motor released.

 

Practical: control unit and PS124 buffer batteries (optional) that can be connected via a convenient guided coupling connector.

 

Flexible: release can be arranged on both sides of the column and / or outside (with accessories KIO and KA1). Easy installation even on existing columns.

6.Apertura porta pedonale interno cancello ( NI-WALY 1024 KCE )

 

 

 

ENGINE:

- WL1024C Electromechanical motor reducer for external mounting with control unit and OXI plug-in receiver.

- ON2E 433.92 MHz transmitter.

- TS Signposting table.

For swing gates with one leaf up to 1.8 m.
Particularly suitable for aluminum, wood or PVC gates.
24 Vdc irreversible electromechanical motor reducer, with articulated arm.
Ultra compact:
  ideal for pedestrian gates, recommended
for small columns (8 cm wide).
Safe: thanks to the irreversible motor and the anti-shearing arm with integrated mechanical closing limit switch

(with full arm installation).
Practical: the articulated arm makes installation possible in particular conditions, such as in the presence of walls or obstacles adjacent to the column.
Quick: no waiting in front of the gate, only 7 seconds to open or close (in optimal installation conditions, with reduced arm and 90 ° opening).
Convenient: the integrated LED flashing light, with courtesy light function (WLT, optional); quick motor release to manually operate the gate.
Integrated control unit:
• simple programming;
• self-learning of the opening and closing limit switches;
• self-diagnosis of anomalies;
• pause time programming;
• pedestrian door;
• slowdown in opening and closing;
• prepared for the connection of the latest generation of sensitive edges.
No black out: operation in the absence of current with the optional batteries (PS424) housed inside the engine.

logo Alutrend www.alutrendgates.com

Opening time

 

Monday: 09:00 - 18:00


Tuesday: 09:00 - 18:00


Wednesday: 09:00 - 18:00


Thursday: 09:00 - 18:00


Friday: 09:00 - 18:00


Saturday: Closed


Sunday: Closed

Contacts

 

Via del Puglia Loc. Bivio Pomonte

06035 Gualdo Cattaneo (PG) Italy

 

For quotes, E-mail: info@alutrend.it

 

For advice and information

E-mail: marketing@alutrend.it

 

Advice and information for Italy

Whatsapp - Tel: + 39 3404530317

 

Advice and information for abroad

Whatsapp - Tel: + 0447821787914

Partners and distributors

Do you want to become a reseller of Alutrend products? Contact us using the appropriate form to request more information. We will be happy to contact you as soon as possible.

  • Bianco Facebook Icon
  • Bianco LinkedIn Icon
  • Bianco Instagram Icona
  • Bianco Twitter Icon
  • Bianco Houzz Icona

ALUTREND © 2011 | PI 00291220549

Via del Puglia Loc. Bivio Pomonte | 06035 GualdoCattaneo (PG) Italy | Tel: +39 0742 91382 | Fax: +39 0742 928147 | Email info@alutrend.it